EPOXY GLUE Quick Steel Adhesive Super Strong Weld Setting for Metal Glass

Description : Quick Steel Epoxy
Code : AB135-02
Capacity : 15g
Appearance : 5 Minutes Multi-Usage Clear Epoxy

* 100% synthetic resin

Quick Steel Epoxy is the adhesive for households and industries. Suitable for repairs and welds.
Makes superior bond strength. Bonds to all metal, plastic, rubber, wood, ceramics, glass and concrete.
Resistant to acid, alkali, ail, solvent and chemicals.
Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. 
Can be filed, grinded and drilled.

* Directions (A: Resin, B: Hardener)

1. Roughen the surfaces to be joined or repaired with sandpaper.
    Ensure surfaces are clean & dry, free from dirt, oil moisture, rust.

2. Remove cap. Pierce the end of tube with point on cap. 
    Be careful to avoid spilling of adhesive when piercing. 
    Squeeze equal amount of Resin & Hardener onto a clean surface. Mix thoroughly.
    Mix ratio 1:1. Wrong ratio or unequal mixing may result in bad hardness.

3. Finish the whole operation within 3 minutes. Solidify in 4 minutes.
    Full bond strength is reached after 6 hours. 
    When the temperature below 10 degree, the hardening time is longer.